What is Duress Disarming?

Article ID: 55

Last updated: 26 Jan, 2009

Duress disarming - If you are ever coerced into disarming your system, you can comply with the intruders wishes while sending a silent duress alarm to the Central Station or Follow Me numbers. To do so, you must use a special duress code, which when used, will disarm the system in the regular manner, while simultaneously transmitting the duress alarm.

To use a duress code, add 1 to the last digit of your user code, as shown in the table below:

User Code (Duress Code)
1-2-3-4 (1-2-3-5)
5-6-7-8 (5-6-7-9)
6-7-8-9 (6-7-8-0)

IMPORTANT: Under no circumstances must the duress code be used haphazardly or without
reason. Central Stations, along with Police Departments, treat duress codes
very seriously and take immediate action

Article ID: 55

Last updated: 26 Jan, 2009

Revision: 1

Comments: 0

Posted: 09 Mar, 2007 by Admin A.

Updated: 26 Jan, 2009 by Admin A.

Print Export to PDF Subscribe Email to friend Share Add comment

This article was: Helpful | Not helpful

Also listed in

	WisDom Wireless Security System

Prev		Next
Do I have to cut into my trim in order to line up the door...		Information About Arming and Disarming